NOTE: Colour scheme may appear different on your screen.
To Start & Finish your shift, follow the instructions below:
The following screenshot will be the first page you see as you open the VIPER Metrics Operator App.
Click "Log In".
Enter "User ID" & "Password".
Your screen will show you your username as the example below.
Once you are logged in, you should see your "Machine", "Username" and "Start Shift".
Click "Start Shift" on the right hand side to commence your shift.
Select "Shift Date".
Select your "Shift Type".
Click the “Tick” Icon.
Once chosen, the below home screen will appear.
Begin your "Pre-Start" by clicking the icon as below.
NOTE: If you are not familiar with how to complete a "Pre-Start Inspection", then click the link below:
When you are ready to start your shift, click “Select Source”.
Fill in the appropriate details in the “Select Source” menu.
Select "Loading Asset" and choose the relevant Asset.
Select "Material Type" and choose the relevant material.
Select the "Destination" and choose the relevant material
Once those have been completed, the current load will appear similar to the below.
Click "Load Now"
Once you have clicked “Load Now”, you have time stamped the start of your load process and tracking the load to the destination marked above.
Once loaded, proceed by taking the load to the "Destination".
Once you are at the destination ready to unload, click “Unload Now”.
Once “Unload Now” has been pressed, it will log the time in the “Unloaded Time” field as you can see below.
NOTE: If details are incorrectly entered / pressed “Load” or “Unload” at the wrong time, the details can be changed by hovering above the load that needs to be edited, then clicking the “Pencil” icon on the right-hand side (as below).
Once you’re in the “Update Load Details” section, you may change the necessary fields as required, then clicking “Update” in the bottom right of the window (as below).
Congratulations, you have completed your first load successfully!
Proceed to your next destination and repeat the processes above.
If you need to change the Material you are loading, you can do so either during the current load or before your next load by selecting the Material button and choosing another.
The different Materials will be shown in different colours.
Once your shift is complete, click the “Day / Date / Shift Type” icon at the top of the window.
You may now click “Log Out”.
Confirm your shift details and proceed by clicking “Logout”.
Congratulations, your shift is now completed!